Warne 20MOA Base M666-20MOA
Page 1 of 1
Warne 20MOA Base M666-20MOA
I have a Warne 20MOA base (item #M666-20MOA) that I couldn't find any height information on, like I could their rings. I have searched the internet and have been unsuccessful.
I finally decided to email Warne and they state that it is .345" in the rear and .315" in the front, as it cants forward. I figured I would post this for anybody who might be looking for that information to help them determine what scope ring size they need, as I have had to order a second set of rings to hopefully get the correct height.
I finally decided to email Warne and they state that it is .345" in the rear and .315" in the front, as it cants forward. I figured I would post this for anybody who might be looking for that information to help them determine what scope ring size they need, as I have had to order a second set of rings to hopefully get the correct height.
XbonesX- Mod
- Posts : 986
Join date : 2010-10-18
Location : Utah
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|