Lyman Mold #311291

Target 50 yds. powder Unique 14.0 grns. rifle Win Mod 70 30/06 five shot group. first time shooting this bullet and this truly amazed me. bullet was cast of #2 lyman.
Rick

extremely nice group.... I will be curious to see what happens when you push it out to 100yrds or more....

tomorrow if all goes well i will be heading out to the rangeand just for you kcatto i will put the targets out at 100 yds. and post the results for you. all rounds were loaded on a Forster Co-Ax press using the seater die from my Lee collet die set with a light crimp using a Lee regular seat crimp die with seater plug removed. also when i sized the cases i pulled the expander ball from my Forster Fl sizing die and used the Lyman M die to open up the neck and also flare the case mouth.
Rick

Nice i cannot wait to see the results at 100yrds.... if it continues to be this good I see a new mold in my future.... I have never shot cast through my 30-06...

seeing how these bullets aren't shooting too good with conventional lube i am moving to plan B. which is now i will Moly coat these lead bullets and see if yhis will help. if it works out i can then shoot lead or jacketed Moly coated bullets and still only have to just use a patch with Ed's Red to clean up the bore. friday will tell if this will be so. with these lead i Moly then size and crimp the gas check then Moly again to coat the gas check. these are waiting for the second coating.

we are waiting for nothing but success!!! nice gas checks too....