300 H&H vs. 300 Weatherby
4 posters
Page 1 of 1
300 H&H vs. 300 Weatherby
Just got about 200 cases stamped 300H&H that has been formed into 300WBY.
The cases was only fired once from new in a 300 H&H rifle and then ran through a 300 WBY full lenght sizer (not done by me).
Okay, this is the deal : What will I need to do to restore these cases to their original caliber 300H&H
Thanks
The cases was only fired once from new in a 300 H&H rifle and then ran through a 300 WBY full lenght sizer (not done by me).
Okay, this is the deal : What will I need to do to restore these cases to their original caliber 300H&H
Thanks
Rigsby- Posts : 3
Join date : 2012-07-21
Age : 63
Location : Denmark
Re: 300 H&H vs. 300 Weatherby
basically the same thing that was done to make them 300 WBY. Full length size them in H&H dies then fire form them in an H&H rifle.
Reload3006- Member
- Posts : 1761
Join date : 2010-11-19
Age : 64
Location : West Plains, Mo. , St. Louis ,Mo.
Re: 300 H&H vs. 300 Weatherby
Reload3006 wrote:basically the same thing that was done to make them 300 WBY. Full length size them in H&H dies then fire form them in an H&H rifle.
I agree. After running them through the H&H dies be sure to check for any cracks at the mouth and then trim to correct length.
eagle60- Member
- Posts : 971
Join date : 2011-01-02
Location : East Central MS
Re: 300 H&H vs. 300 Weatherby
I think I would anneal them first, but that's just me.
nicholst55- Posts : 37
Join date : 2010-11-21
Age : 68
Location : Yuma, AZ
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|