makeing your own
3 posters
Page 1 of 1
makeing your own
i have a new barrel for my nef single shot..500 s&w mag ,seeing on the net .there was a guy makeing gas checks with atop mount die and cutter.has anyone else seen this . and if so were can i buy one.----------P.S NEF SOLD TO H&R AND I FOUND OUT THAT REMINGTON OWNS THEM.BUT NOW JAPAN WILL START MAKEING NEF RIFLES. THANKS .
old timer- Posts : 1
Join date : 2013-03-26
Re: makeing your own
I would contact Pat Marlin if your looking for a check maker. Corbin MFG makes them too but you will wait and pay through the nose for a corbin set.
Reload3006- Member
- Posts : 1761
Join date : 2010-11-19
Age : 64
Location : West Plains, Mo. , St. Louis ,Mo.
Re: makeing your own
I just checked a thread on another forum and depending on what you want and what Pat may have available seems to set the time for delivery. Apparently anywhere from 3 to 8 weeks Here is a link to his web site,
" http://www.patmarlins.com "
There is also a company called Freechex. I have never used a check maker but there are videos on youtube.
" http://www.patmarlins.com "
There is also a company called Freechex. I have never used a check maker but there are videos on youtube.
Sasquatch-1- Member
- Posts : 372
Join date : 2011-11-16
Age : 71
Location : Eastern Panhandle of WV
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|