458 caliber swage dies
+8
algunjunkie
XbonesX
dartfreak75
Reload3006
RichBirdHunter
Daywalker
eagle60
mrmat4570
12 posters
Page 1 of 1
458 caliber swage dies
Just thought I would post some pics of my new Swage Dies that I made for forming HP 458 cal bullets............
This is the complete die setup
Die pulled apart so you can see the punch and bolt that has been center drilled........
Even though these were only cast wheel weights they still turned out well reforming the nose and putting a HP tip on the bullet, I hope soon i will have enough cases together to make some jackets.
This is the complete die setup
Die pulled apart so you can see the punch and bolt that has been center drilled........
Even though these were only cast wheel weights they still turned out well reforming the nose and putting a HP tip on the bullet, I hope soon i will have enough cases together to make some jackets.
mrmat4570- Posts : 44
Join date : 2010-10-18
Age : 46
Re: 458 caliber swage dies
Very nice Mat! What kind of press are you going to use it in?
eagle60- Member
- Posts : 971
Join date : 2011-01-02
Location : East Central MS
Re: 458 caliber swage dies
Well at the moment I have been playing around with it in my beefed up Lee Classic Cast but I also have a solid steel home designed press about 3/4 of the way finished...........
mrmat4570- Posts : 44
Join date : 2010-10-18
Age : 46
Re: 458 caliber swage dies
Most excellent Mat.. Looking good...
Daywalker- Admin
- Posts : 2324
Join date : 2010-10-18
Location : Virginia
Re: 458 caliber swage dies
mrmat4570 wrote:Well at the moment I have been playing around with it in my beefed up Lee Classic Cast but I also have a solid steel home designed press about 3/4 of the way finished...........
Post pics of the home made press, and a video when it's up and running
RichBirdHunter- Member
- Posts : 1127
Join date : 2010-11-09
Age : 57
Location : DFW
Re: 458 caliber swage dies
fantastic job
Reload3006- Member
- Posts : 1761
Join date : 2010-11-19
Age : 64
Location : West Plains, Mo. , St. Louis ,Mo.
Re: 458 caliber swage dies
very nice job !!!
dartfreak75- Member
- Posts : 1182
Join date : 2010-11-21
Age : 39
Location : southwest va
Re: 458 caliber swage dies
looks good man.
XbonesX- Mod
- Posts : 986
Join date : 2010-10-18
Location : Utah
Re: 458 caliber swage dies
Excellent job....very impressed!
hawcer- Mod
- Posts : 1896
Join date : 2010-11-04
Age : 52
Re: 458 caliber swage dies
vrey sweet
johndeereboy24- Posts : 33
Join date : 2011-01-02
Age : 43
Location : SE kansas
Re: 458 caliber swage dies
good job man wish i could make some of those. mabe one day nice work
Hughie- Member
- Posts : 210
Join date : 2011-01-23
Age : 61
Location : Va
Re: 458 caliber swage dies
good job bud, hope you got a vid comin
CMAsailor- Member
- Posts : 199
Join date : 2010-10-19
Location : On a boat
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|