Would you like to react to this message? Create an account in a few clicks or log in to continue.

slow loads for .223

+3
B W M
hawcer
Reload3006
7 posters

Go down

slow loads for .223 Empty slow loads for .223

Post by Reload3006 Tue Oct 04, 2011 9:22 am

We were in the topic of barrel twist for certain bullet weights. Here is my problem. I got all the stuff to make 22 rim fire .224 bullets ... but because they are too light my 1:9 savage throws them every where. Does any one have a slow load for a 55gr 223?
I think i need to be pushing them around 2500fps to jive with my twist... anyone?
Reload3006
Reload3006
Member
Member

Posts : 1761
Join date : 2010-11-19
Age : 65
Location : West Plains, Mo. , St. Louis ,Mo.

Back to top Go down

slow loads for .223 Empty Re: slow loads for .223

Post by hawcer Tue Oct 04, 2011 9:30 am

I was going to mention trailboss reduced loads....but it only shows velocity of 1074fps using 4.0gr....a little too slow.

I can't think of a good load off hand but If I had my QL working I could find something in the ballpark.

H322 or h4198 looks like it could fit the bill....Minimum fps for a 55gr bullet is just over 2800fps. reduce the load about 1 to 1-1/2 grains might land it right in the range you are needing.

hawcer
hawcer
Mod

Posts : 1896
Join date : 2010-11-04
Age : 53

Back to top Go down

slow loads for .223 Empty Re: slow loads for .223

Post by B W M Mon Nov 19, 2012 12:58 am

If you will look around there is a subsonic load for the 223. I jest don't rember where I seen it.

B W M

Posts : 87
Join date : 2012-11-18
Age : 84
Location : Princeton IN

Back to top Go down

slow loads for .223 Empty Re: slow loads for .223

Post by psloader Mon Nov 26, 2012 8:04 pm

I like IMR 4064 for the 55 grain load there is some play with the charge you can work with .

If you find that change load and that does not work you may change the round its self it may be your rifle does not like the round its self .

psloader

Posts : 47
Join date : 2012-08-04
Age : 45
Location : some were

Back to top Go down

slow loads for .223 Empty Re: slow loads for .223

Post by EdgarEg Mon Nov 26, 2012 9:42 pm

EdgarEg
EdgarEg
Member
Member

Posts : 579
Join date : 2010-12-17

Back to top Go down

slow loads for .223 Empty 22 to 224

Post by ar3006 Mon Dec 03, 2012 3:01 pm

Hi,
I've been making 224 out of 22 for some time now, I've had very good success at the range using IMR 4895, powder using
22.5 gr with a CC small rifel primer, I get a half each group at 50 yards using my Ruger m77 MarkII, i have not had any problems with pressure, I fired five or six hundred rounds at the range.

I hope this helps.

AR3006 santa

ar3006

Posts : 56
Join date : 2012-01-22
Age : 85
Location : New York

http://earthlink.net

Back to top Go down

slow loads for .223 Empty Re: slow loads for .223

Post by Hughie Tue Jan 15, 2013 3:58 pm

hawcer wrote:I was going to mention trailboss reduced loads....but it only shows velocity of 1074fps using 4.0gr....a little too slow.

I can't think of a good load off hand but If I had my QL working I could find something in the ballpark.

H322 or h4198 looks like it could fit the bill....Minimum fps for a 55gr bullet is just over 2800fps. reduce the load about 1 to 1-1/2 grains might land it right in the range you are needing.

Does the trailboss loads cycle ok thru the Ar ? this is kinda what i have been looking for. bushytail hunting.
Hughie
Hughie
Member
Member

Posts : 210
Join date : 2011-01-23
Age : 62
Location : Va

Back to top Go down

slow loads for .223 Empty Re: slow loads for .223

Post by hawcer Tue Jan 15, 2013 9:09 pm

Hughie wrote:
hawcer wrote:I was going to mention trailboss reduced loads....but it only shows velocity of 1074fps using 4.0gr....a little too slow.

I can't think of a good load off hand but If I had my QL working I could find something in the ballpark.

H322 or h4198 looks like it could fit the bill....Minimum fps for a 55gr bullet is just over 2800fps. reduce the load about 1 to 1-1/2 grains might land it right in the range you are needing.

Does the trailboss loads cycle ok thru the Ar ? this is kinda what i have been looking for. bushytail hunting.

It probably wouldn't cycle correctly without modifying the gun. But you never know...
hawcer
hawcer
Mod

Posts : 1896
Join date : 2010-11-04
Age : 53

Back to top Go down

slow loads for .223 Empty Re: slow loads for .223

Post by B W M Sat Jan 18, 2014 5:54 pm

Try Winchester 748 or Accurate 2520 The 748 would be my first choice. I have used it in bolt guns 223 for years it will not burn up a barrel.By the way they were 3 different Savages. You can go on the internet and put down SSL and you will 4 or 5 wed sites to look at.

B W M

Posts : 87
Join date : 2012-11-18
Age : 84
Location : Princeton IN

Back to top Go down

slow loads for .223 Empty Re: slow loads for .223

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum