Why I love RCBS
+2
hawcer
Reload3006
6 posters
Page 1 of 1
Why I love RCBS
this is an email i sent to RCBS
Sirs
I have a set of 44mag/Specal Carbide dies
and a set of 357/38special carbide dies. I have seen several people talking
about a spacer ring for the bullet seat/crimp die. Can you provide me with a
part number for these Items so I can order one for each set.
thank you
This is their response
we are sending you 2 at no charge, have a great day.
Thank you,
Technical Service Department/rm
ATK/RCBS Operation
(800) 533-5000
605 Oro Dam Blvd E.
Oroville, CA 95965
NEED I SAY MORE?
Sirs
I have a set of 44mag/Specal Carbide dies
and a set of 357/38special carbide dies. I have seen several people talking
about a spacer ring for the bullet seat/crimp die. Can you provide me with a
part number for these Items so I can order one for each set.
thank you
This is their response
we are sending you 2 at no charge, have a great day.
Thank you,
Technical Service Department/rm
ATK/RCBS Operation
(800) 533-5000
605 Oro Dam Blvd E.
Oroville, CA 95965
NEED I SAY MORE?
Reload3006- Member
- Posts : 1761
Join date : 2010-11-19
Age : 64
Location : West Plains, Mo. , St. Louis ,Mo.
Re: Why I love RCBS
Yeppers! That's the typical response I usually get too. I wonder if those spacer rings are caliber specific or all the same thickness. I have one that came with my 10mm/40cal dies....but I've been using it with my CH4D swage dies....
The only thing I have EVER had a problem getting fixed or replaced by RCBS was my hand held neck turner....they did try to send me the parts they thought would fix it, so at least they tried. I've since traded it off....maybe someday I'll try another one.
The only thing I have EVER had a problem getting fixed or replaced by RCBS was my hand held neck turner....they did try to send me the parts they thought would fix it, so at least they tried. I've since traded it off....maybe someday I'll try another one.
hawcer- Mod
- Posts : 1896
Join date : 2010-11-04
Age : 52
Re: Why I love RCBS
yup RCBS quality company....
kcatto- Member
- Posts : 648
Join date : 2010-11-15
Age : 52
Location : Oklahoma
Re: Why I love RCBS
Well, I love RCBS coz they are green...its really a goog tool to own and price is just right with all the warranty..
cobrarolex- Posts : 4
Join date : 2011-08-17
Re: Why I love RCBS
I dropped my uniflow measure (TWICE) and both times RCBS sent me a replacement hopper at no charge. Their cs is top notch.
mac60- Posts : 14
Join date : 2011-01-15
Age : 63
Location : Alabama gulf coast
Similar topics
» RCBS 45 acp dies
» Falling out of love with my Forster Coax Press due to shellholder.
» RCBS power trimmer
» Silly question about RCBS
» RCBS RN 225 grain Casts
» Falling out of love with my Forster Coax Press due to shellholder.
» RCBS power trimmer
» Silly question about RCBS
» RCBS RN 225 grain Casts
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|