Question about dies
4 posters
Page 1 of 1
Question about dies
I have a set of 308 dies with a broken decapping rod, so can I take the decapping pin out of my 30-06 die and use it? Since they use the same bullets?
brow_tines- Member
- Posts : 375
Join date : 2010-11-09
Age : 49
Location : South East Kentucky
Re: Question about dies
Should be able to.
I did have a problem one time doing that between a 223 and 22-250 though.
I did have a problem one time doing that between a 223 and 22-250 though.
XbonesX- Mod
- Posts : 986
Join date : 2010-10-18
Location : Utah
Re: Question about dies
Do the dies have to be the same brand? Like do both dies have to RCBS?XbonesX wrote:Should be able to.
EdgarEg- Member
- Posts : 579
Join date : 2010-12-17
Re: Question about dies
No, as long as the threads are the same and the stem mounts the same.
What did you actually break? The pin or the stem/rod? If you only broke the pin and the pin from the other die mounts the same you can interchange them. Now if one of the dies uses a pin with a head on it, it may still work if you can use the expander ball, or you may be able to use the whole stem/rod if your using the same caliber expander ball.
RCBS uses 2 different size decapping pins, and they are not interchangeable. Some of the other brand dies use a pin with a head on them and they will not work on a strait pin mount.
If your in a bind and want to keep working deprime the brass using the 30.06 die, then size with your .308 die like normal. The only difference is your using a different die to deprime. You will still size the same as your .308 die the only difference it it has a broken decapping pin in it.
What did you actually break? The pin or the stem/rod? If you only broke the pin and the pin from the other die mounts the same you can interchange them. Now if one of the dies uses a pin with a head on it, it may still work if you can use the expander ball, or you may be able to use the whole stem/rod if your using the same caliber expander ball.
RCBS uses 2 different size decapping pins, and they are not interchangeable. Some of the other brand dies use a pin with a head on them and they will not work on a strait pin mount.
If your in a bind and want to keep working deprime the brass using the 30.06 die, then size with your .308 die like normal. The only difference is your using a different die to deprime. You will still size the same as your .308 die the only difference it it has a broken decapping pin in it.
tripples- Member
- Posts : 228
Join date : 2010-12-25
Similar topics
» Anyone Else Finding Lee Dies Have Incorrect Parts...or Incorrect Dies in their Sets from Midway?
» AR dies
» C & H 4D Swage dies
» Swage-it dies
» RCBS 45 acp dies
» AR dies
» C & H 4D Swage dies
» Swage-it dies
» RCBS 45 acp dies
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|