Would you like to react to this message? Create an account in a few clicks or log in to continue.

Testing at the range

+3
RichBirdHunter
Daywalker
hawcer
7 posters

Go down

Testing at the range Empty Testing at the range

Post by hawcer Mon Mar 28, 2011 9:03 am

Finally! I made it to the range to do some testing.

First up was my 44mag 195gr swaged bullets and the 240gr DW had swaged.

-The 195's were loaded with 12gr of unique ,WLP
- 240gr I loaded at 9gr of Unique, WLP
- second batch of 240gr at 19gr of Lil Gun, WLP

Testing at 25 yards.

The 195's had a nice sharp recoil, but shot low and to the right. I adjusted the sites some, but I didn't want to over adjust, just in case...so it was still low and right

The 240's loaded with 9gr of Unique shot center, but about an inch high....really soft,pleasant recoil.

The 240's loaded with 19gr of Lil gun were dead on center and a joy to shoot. A little more bang, without too much more recoil. My favorite so far Smile

I'll have to play with the 195gr loads....maybe back off to around 10gr and work up again.I loaded these to test expansion ...but time was short. I'll work on a accurate load then go from there.

On to the 40gr Hornet/223 reduced loads I was working on earlier this winter.

test groups are reduced loads using H4895 and Unique pistol powder. Gun used for testing is a 1911 45acp frame with a 223 single shot upper, 12" barrel ,1-14"twist. 4x pistol scope.

All shots fired hit roughly 1" high and 1" to the left at 25 yards. I made no adjustments as I was looking for the best groups.

test ammo was loaded in increments from 19gr up to 20.5gr of H4895 and 5gr up to 7gr of Unique.

The H4895 loads shot ok and the groups tightened up the best at 19.5gr. But alot of unburned powder was to be found in every case.

The Unique loads where a blast....5gr was really mild and quiet...much like a 22lr in a pistol. The best group was with the 7gr.(some holes touching) . No signs of pressure from any of the 223 cases fired.

I will take the 7gr load and work on it later at the 50 yard range next time.

Sorry no pics...I was in a bit of a rush.Sad

I also got to finally try out my new PT1911. Flawless as expected Smile

Edit: ok here are the pics...


Testing at the range Dsc04611
Testing at the range Dsc04612
Testing at the range Dsc04613
Testing at the range Dsc04614
Testing at the range Dsc04615

All I have is a short vid shooting the 44mag...I'll upload it later.


Last edited by hawcer on Mon Mar 28, 2011 6:12 pm; edited 1 time in total
hawcer
hawcer
Mod

Posts : 1896
Join date : 2010-11-04
Age : 52

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by Daywalker Mon Mar 28, 2011 9:34 am

Glad to hear that you made it to the range. Sounds like you had a successful day!! I am still trying to make it out to the post office to get you that mold to try out for the cores...

Keep up the good work man!!
Daywalker
Daywalker
Admin
Admin

Posts : 2324
Join date : 2010-10-18
Location : Virginia

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by RichBirdHunter Mon Mar 28, 2011 10:13 am

I get in a lot of trouble for not posting pics why does Hawcer get off scott free ? J/k
RichBirdHunter
RichBirdHunter
Member
Member

Posts : 1127
Join date : 2010-11-09
Age : 57
Location : DFW

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by hawcer Mon Mar 28, 2011 10:16 am

RichBirdHunter wrote:I get in a lot of trouble for not posting pics why does Hawcer get off scott free ? J/k

Ok...I'll dig through the van and find the targets...I think I have them still. Wink
hawcer
hawcer
Mod

Posts : 1896
Join date : 2010-11-04
Age : 52

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by Daywalker Mon Mar 28, 2011 10:22 am

RichBirdHunter wrote:I get in a lot of trouble for not posting pics why does Hawcer get off scott free ? J/k

Oh trust me, wait till all the others logs in today.... He won't get away with it LOL....
Daywalker
Daywalker
Admin
Admin

Posts : 2324
Join date : 2010-10-18
Location : Virginia

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by Reload3006 Mon Mar 28, 2011 11:03 am

Have to be honest I really was wondering where all the pics are?
Reload3006
Reload3006
Member
Member

Posts : 1761
Join date : 2010-11-19
Age : 64
Location : West Plains, Mo. , St. Louis ,Mo.

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by billarrington Mon Mar 28, 2011 11:55 am

:worthless-with .... i had to do it hawcer lol ....WE NEED PICS OF TARGETS, LOADED ROUNDS ALSO TO REFRESH OUR MEMORY...any day at the range is better than.... well everything for me rofl you know what they say.. pics or it never happened lol.....bill

billarrington
Member
Member

Posts : 148
Join date : 2010-11-04
Age : 59
Location : west virginia

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by hawcer Mon Mar 28, 2011 12:59 pm

ok you all....I'll get some pics tonight as long as you don't make fun of my targets( black marker on plain paper made by my youngest son). I know I have the ones from the 223...not sure on th 44mag....I know I recycled a few for the 100yrd shooting my other son was doing wth the AR.

I didn't have time to go 20 miles out of the way to get new targets, so we had to improvise.
hawcer
hawcer
Mod

Posts : 1896
Join date : 2010-11-04
Age : 52

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by Hughie Mon Mar 28, 2011 1:33 pm

LOL hawcer no need to worry i would never make fun of someones targets made a few myself ... Very Happy
Hughie
Hughie
Member
Member

Posts : 210
Join date : 2011-01-23
Age : 61
Location : Va

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by eagle60 Mon Mar 28, 2011 1:48 pm

I've been known to use some of those targets my self Smile Glad you made it to the range for some testing. Sounds like it is coming together like it ought to...
eagle60
eagle60
Member
Member

Posts : 971
Join date : 2011-01-02
Location : East Central MS

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by hawcer Mon Mar 28, 2011 6:13 pm

Pics added Smile
hawcer
hawcer
Mod

Posts : 1896
Join date : 2010-11-04
Age : 52

Back to top Go down

Testing at the range Empty Re: Testing at the range

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum